Buyer questions
Paper Cups, answered.
The questions that come up before a sample or a purchase order. Every answer is written for this collection — not copied from a generic FAQ.
Which cup should I use for hot coffee — single wall, double wall or ripple?
Single-wall cups with a sleeve are the standard; double-wall or ripple cups avoid the extra sleeve and keep the hand cooler. Hollow-wall gives an air gap. Match the construction to the drink temperature and how the cup is served.
Will the cup leak?
The body seam and base are sealed; leakage usually comes from a damaged rim, a mismatched lid or a cup that has been over-filled. Request a filled test with your lid and drink temperature before the run.
Which lids fit these cups?
PET, PP and PLA lids are listed with the cups they fit. A lid is not interchangeable across rim diameters, so confirm cup and lid as one set and ask for a filled leak test if the drink is carried.
Can the cup hold boiling water?
Food-contact grade cups are specified for hot drinks; single-wall cups transfer heat to the hand, so use a sleeve. Confirm the temperature and holding time for your service — long holding softens the board.
Are the cups microwave-safe?
Only cups and coatings specified for microwave use. PE coating softens at high heat and printed ink can be affected. Vent the lid, test with your food and time, and do not assume every cup in the range is microwavable.
Are the cups compostable or recyclable?
PE-coated paper cups are not compostable. Water-based or PLA-coated options are available where the mill certifies them, and the coating decides whether the cup is accepted in a paper stream. Ask for the certificate for the exact grade.
Can I print my logo on the cup?
Yes — flexo print with food-grade ink. Plates and tooling are quoted per design, and the print area depends on the cup size. Send vector artwork and the target quantity; we confirm print area and MOQ in the quotation.
What sizes are available?
From small tasting cups to 32 oz cups, plus soup cups and salad bowls. Capacity and dimensions are listed model by model in the catalogue. Tell us the drink, the target market and the fill level.
Do you supply sleeves and stirrers?
Yes — paper sleeves in stock and custom print, plus wooden coffee stirrers. Sleeves and stirrers are quoted separately unless you ask for a set price with the cup.
Can I customise the sleeve and carton?
Yes. Sleeve print, header cards, master carton marks and barcodes are quoted with the cup. Retail-ready packing and pallet configurations are agreed before the run.
What is the MOQ?
MOQ is quoted per model and packing. Stock items can start at a small quantity; printed or tooled items depend on the run and the plate. Send the model and target quantity — we confirm the MOQ in writing.
What food-contact documents can you provide?
Migration and food-contact documentation for the grade quoted, where the mill has issued it. We do not issue a blanket FDA approval; we state what the paper, coating and ink supplier has certified for that grade.